BILATEX - SBR

اطلب عرض أسعار
تنزيل TDS

الوصف

BILATEX SBR is a water dispersion of Styrene Butadiene Copolymer. It is characterized by high bonding force and water resistance. It is stable when mixed with wet alkaline conditions. When mixed with concrete, it creates a reinforcing bonding matrix with the cement.

المواصفات

BILATEX SBR when added to cementitious mix enhances the mix with higher bonding adhesion power to the substrate, with superior elasticity, impermeability and flexure resistance. The product also improves the abrasion and acid characteristics of cured mix.

BILATEX SBR is suitable for application in concrete, sand/cement mix, flooring screeds and repair compounds. It can be used externally and internally in areas of intermittent or continuous water content. It is especially suitable for renders and as primer to concrete flooring to provide high bonding onto the substrate of low permeability.

التراخيص / الشهادات

الاستخدامات

To avoid damp and water leakage risk, it is recommended for:

  • To prepare bonding slurry between old and new concrete.
  • Can be added to cement floor screed mixes.
  • Additive to enhance waterproofing and flexibility for mortars.
  • Additive to cementitious tile adhesives to improve flexibility.
  • As a primer for cementitious concrete repair products.
  • Can be coated on top of repair products to act as a curing compound.
  • To increase the adhesion power of cementitious products.
  • To prepare repairing mortar, cementitious rendering, cement slurry, floor screed, high flexible plastic etc.

SHELF LIFE

BILATEX SBR can be utilized within 12 months of production date if stored in proper conditions in unopened original packing.

التخزين

  • احفظ المنتجات في مكان جاف.
  • Store in original packing in dry conditions away from direct sunlight.

المزايا

  • Improves adhesion and bonding.
  • Suitable for use in damp conditions.
  • Improves workability, strength and abrasion resistance.
  • Reduces shrinkage and cracking and improves flexibility.
  • Improves chemical and water resistance.
  • Allows reduction in water content.
  • Can be used with concrete in portable water tanks.

تحضير السطح

All surfaces should be sound free from laitance, oil and grease. In case of hard or deep contamination, surface should be cleaned using mechanical scrubbing or grit blushing to reach a fresh clean exposed concrete surface.

ADDITIVE FOR CONCRETE REPAIR

Be sure to remove all the damaged parts to ensure a sound substrate. Steel reinforcement should be protected against rust.

المعايير

BILATEX SBR conforms to:

  • BS 1199
  • ASTM C109. ASTM C 190, ASTM C932-12

التطبيق

  • To prepare bonding slurry between old and new concrete.
  • Can be added to cement floor screed mixes.
  • Additive to enhance water proofing and flexibility for mortars.
  • Additive to cementitious tile adhesives to improve flexibility.
  • As a primer for cementitious concrete repair products.
  • Can be coated on top of repair products to act as a curing compound.
  • To increase the adhesion power of cementitious products.
  • To prepare repairing mortar, cementitious rendering, cement slurry, floor screed, high flexible plastic etc. Please refer to the below dosage table. For more details about application, please contact BITUGULF Technical Department.

MIXING

BILATEX SBR is ready for direct use. The product must be diluted with water depending to application requirements. Refer to the dosage table below. Forfurtherinformation contact BITUGULF Technical Department.

PACKAGING

BILATEX SBR is supplied in 5 liter, 20 liter jerkins and 200 liter drums.

BILATEX SBR AS BONDING SLURRY

Mix BILATEX SBR with water and cement 1:1:3 and apply as a bonding slurry between fresh concrete and old concrete, the SBR Bonding Slurry ensures adhesion between new and old concrete additives.

ADDITIVE FOR SCREED FLOORING APPLICATION

The substrate should be saturated with water to avoid possible absorption of water of the mix. Always apply bonding slurry to the substrate before pouring the screed. This acts as anchorage bonding between the floor screed and the substrate. Ensure that the screed is poured while the bonding slurry is still fresh.

الصحة والسلامة والبيئة

يجب الالتزام بجميع إجراءات السلامة أثناء التنفيذ. ويجب توفير طفايات حريق في الموقع. كما يجب توخي الحذر عند التعامل مع الغاز، ويجب عدم وضع الشعلات على الأسطح المنجزة أو على أي
مواد قد تتعرض للخدش بفعل اللهب أو حرارة الشعلة. ويجب على جميع العمال ارتداء القفازات والنظارات الواقية أثناء التنفيذ.

يرجى قراءة وفهم واتباع جميع أوراق بيانات سلامة المواد ومعلومات ملصق المنتج الخاصة بهذا المنتج قبل استخدامه.

الدعم الفني

تتألف فريق الدعم الفني التابع لشركة "بيتوجلف" (Bitugulf) – التابعة لشركة "إنترناشونال إنسوليشن" (IIC) – من مهندسين خبراء يقدمون خدمات دعم شاملة للمصممين والمستخدمين النهائيين والمقاولين، بالإضافة إلى المساعدة الفنية في الموقع.

ملاحظة: تعكس البيانات الفنية المقدمة الخصائص النموذجية استنادًا إلى الاختبارات المعملية والتجارب العملية، وتخضع لمستويات التفاوت المسموح بها وفقًا لمعايير الاتحاد الأوروبي للطاقة (UEAtc). ورغم أننا لا نستطيع ضمان الأداء في جميع الظروف، فإن المزيد من التفاصيل متاح عند الطلب، مع تفاوت قياسي يصل إلى 20%.

البيانات الفنية