BITUPRIMER

Request a Quote
Download TDS

DESCRIPTION

Bituprimer is a cold applied general purpose roofing primer used as dressing to concrete, masonry, and metal surface. And as the primer coat prior to application of Bitugulf membranes.

SPECIFICATION

APPROVALS / CERTIFICATES

USES

STORAGE

  • Keep the products packed in a dry place.
  • Keep away from direct sunlight
  • Use only with proper ventilation.
  • Avoid contact skin and eyes by careful working.
  • Do not use near open flame.
  • It is advisable to use goggles and gloves.
  • In case of eye contactimmediatelywash with coldwater or consult the physician

DRYING TIME

Less than four hours, to touch depends on local weather conditions.

SURFACE CLEANING

APPLICATION

  • The surface must be thoroughly cleaned and all dust, dirt, oil, and grease to be removed.
  • Bituprimer should be well stirred prior to use and applied to the substrate by means of brush, roller or spray.
  • After application don’t leave the primer exposed for more than 24 hours, if this should be the case, apply a further coat and allow curing. Tools may be cleaned with any solvents.

COVERAGE RATE

Coverage rate varies from 0.2 – 0.3 kg/mΒ² depending on application method, surface properties and condition of substrates.

PACKAGING

Bituprimer is supplied in 180-kg drums and 15-kg pails. Each drum/pail bearing the product name and batch code.

APPLICATION TOOLS AND EQUIPMENT

Bituprimer is a bituminous liquid that penetrates deep into the porous substrates to improve the adhesion of bituminous materials that are to be applied to the substrate.

HEALTH, SAFETY AND ENVIRONMENT

All safety measures should be observed during application. Fire extinguishers should be available at site. Care should be taken with gas, and torches should not be rested on finished surface or on any materials that can be scratched by flame or hot torch. Gloves and goggles should be worn by all workers during application.

Read, understand and follow all Material Safety Data Sheets and product label information for this product prior to use.

TECHNICAL SUPPORT

International Insulation Company (IIC) – Bitugulf technical support team consist of expert engineers offers a comprehensive service support to specifiers, end users and contractors, and on-site technical assistance.

Note: The technical data provided reflects typical properties based on laboratory tests and practical experience, subject to UEAtc tolerance levels. While we cannot guarantee performance under all conditions, further details are available upon request, with a standard variation of up to 20%.

TECHNICAL DATA